Rodec Rodec MX180 Original Mx180 230x230 5-Kanal,17 Inputs,Gain/3fach EQ/ALPS-Fader/Balance pro Kanal.. Product #: ro-mx180 3-5 Tage

Rodec MX180 Original

Marke: Rodec
Verfügbarkeit: 3-5 Tage
Preisanfrage: +41562840679

Die ständige Weiterentwicklung der legendären seit 1985 gebauten RODEC MX18/180/180MKII/MX180MK3:

    Balanceregler pro Kanal für Raumeffekte mit 3 Turntables
    neue, massive und leichtgängige ALPS-Drehpotis
    neue, stabile Eingangsumschalter
    neue Softtouch Schiebeknöpfe und Drehknöpfe
    unten angeordnete PFL-Druckschalter mit viel Platz drumrum - endlich
    extra-langes, exaktes doppeltes VU-Meter; voll zuordnungsfähig
    staubgeschützte Conductive Plastic Leitplastik Studio Fader mit T-Aufnahme
    nochmals 1dB besserer Rauschspannungsabstand als MK3
    linearer Sound mit druckvoller Basswiedergabe - eben RODEC Sound
    3 separate Outputs mit 3 Schiebereglern
    mehr Kopfhörerleistung
    Headphone-Mixing per stufenlosem Überblendregler - endlich
    klangneutraler Ringkerntransformator
    neuer stabiler Netzschalter
    Conductive Plastic Leitplastik Studio Crossfader mit leichter Mittelraste
    flexible Innenverkabelung
    zwei unabhängige elektronisch symmetrierte XLR-Ausgänge
    stabiles Gehäuse mit eingelassenen Muttern
    schwarze Oberfläche mit abriebfestem Aufdruck

5 Channel 19” 7HE Professional Audio Mixer

4 Multiple input channels with:
- Gain
- Triple tone control
- Balance
- PFL select pushbutton with LED-indicator (cue)

Channel 1: Line A, Line B, Balanced XLR Mic, phono
Channel 2: Line A, Line B, Balanced XLR Mic, phono
Channel 3: Line A, Line B, Balanced XLR Mic, phono
Channel 4: Line A, Line B, Balanced XLR Mic, phono
Channel 5: Separate balanced XLR Mic channel with gain, triple tone control, talk-over, pan, PFL and FX insert

4 Phono Inputs
8 RCA Line Inputs
5 Balanced XLR Mic inputs

3 Master outputs
Master 1 (Main): RCA and balanced XLR output with mono / stereo mode
Master 2 (Main): RCA and balanced XLR output with mono / stereo mode
Master 3 (Monitor): RCA output with mono/stereo mode, without DJ Mic

Record outputs
4 RCA record outputs.
These record outputs can also be used as AUX output.

Music effects insert
Music effects insert connectors (JACK) to connect external effect units.

Faders – Crossfader
Easy-slide 60mm channel faders.
Crossfader between channels 1-2 and 3-4.
Soft touch fader knobs for better grip.

Headphones
Headphones can be connected on the front or rear of the mixer.
Very strong DJ headphones amplifier.
Headphones select rotary PFL / SUM.

Power supply
Internal universal switching power suply 90V <> 264V.

Nominal analogue input levels:
Line A asymmetrical (RCA)
Line B asymmetrical (RCA)
Phono asymmetrical (RCA gold plated)
Microphone (channel 1 – 4) symmetrical (XLR)
Microphone symmetrical (XLR or ¼” TRS JACK)
Effects return (1/4” TRS JACK)

Nominal analogue output levels:
Master 1 asymmetrical (RCA)
Master 1 symmetrical (XLR)
Master 2 asymmetrical (RCA)
Master 2 symmetrical (XLR)
Monitor asymmetrical (RCA)
Record asymmetrical (RCA)
Effects send asymmetrical (1/4” TRS JACK)
Headphones (1/4” TRS JACK)

Music equalizer:
Low: +12dB / -12dB at 100Hz
Mid: +12dB / -12dB at 1kHz
High: +12dB / -12dB at 10kHz

Microphone equalizer:
Low: +12dB / -12dB at 100Hz
Mid: +12dB / -12dB at 1kHz
High: +12dB / -12dB at 10kHz

General specifications:
Frequency response: +/- 0.40dB from 20Hz to 20kHz
Subsonic filter: -25dB at 10Hz
Signal headroom: 20.0dB @ 1kHz / THD < 0.015%
Dynamic range: 110dB
Signal to noise ratio: 90dB
Total harmonic distortion: < 0.006%
Crosstalk left to right of an input channel: >48dB @ 1kHz
Crosstalk channel to channel >96dB @ 1kHz

Power supply voltage: 90VAC – 264VAC
Power supply frequency: 47Hz – 63Hz
Power consumption: 40W (On), 45W (Full load), 5W (Stand by)

Operating temperature: 0°C (32°F) – 40°C (104°F)
Operating humidity: 5% - 90% (no condensation)

Mechanical specifications:
Frontpanel dimensions (W x D): 482.0mm (19.0”) x 310.0mm (12.2“) (7HE)
Bottombox dim. (W x D x H): 442.0mm (17.4“) x 294.0mm (11.6“) x 151.0mm (5.9“)
Panel cut out dimensions (W x D): 446.0mm (17.6“) x 298.0mm (11.7“)
Packed box dimensions (W x D x H): 560mm (22.0“) x 384mm (15.1“) x 254mm(10.0“)
Weight: 6.22kg (13.71lbs)
Packed weight: 7.62kg (16.79lbs)

Standard CROSS FADER for Original Series
Replacement Cross fader for all models since 1986 & Original Series
Order code: 94 001 0069

Standard CHANNEL FADER for Original Series
Stereo Channel replacement fader for all models since 1986 & Original Series
(Mic Channel for Progressive series MX-1400 1800 2200 & 3000)
Order code: 94 001 0079

Standard MASTER CHANNEL FADER for Original series
Stereo Master replacement fader for all models since 1986 & Original Series
(Also Master fader for Progressive series MX-1400 1800 2200 & 3000)
Order code: 94 001 0080

Standard ROTARY KNOBS SET for Original series
Order code: 94 001 0040

Standard FADER KNOBS SET for Original series
Order code: 94 001 0041